Protect Your Cars Fuel Delivery System and Save Costly Fuel Pump Replacement Down The Road

Revolutionary New Product can Save You Time and Money on Costly Repairs!

The Clean Fuel Screen Filter2The Clean Fuel Screen Filter was invented by Ernie Washington, an aviation & automotive mechanic of 60+ years. This product was invented while contracting in the Middle East.

While servicing a large fleet of vehicles in support of the military, we noticed a gross amount of unserviceable vehicles due to failure of major components in the fuel delivery system. This was caused by particulates, debris, & sediment being introduced into the tank during refueling.

Although we already have at least 2 filters in most vehicles systems, they are all post filters, meaning that they are attempting to filter the fuel after it has already entered the tank.

This got us thinking..Not only is this a major issue in the Middle East, but during my 50 years of owning my own repair facilities across the U.S., I have encountered this same “dirty fuel” problem over & over again.  I knew that something needed to be developed that would eliminate this problem for good. That’s when I came up with the idea of filtering the fuel before it enters the tank.

Dirty Fuel Can Cost You MoneyThe Clean Fuel Screen Filter is a revolutionary product that does just that.

No auto mechanic needed to install or remove the Clean Fuel Screen Filter.

It’s low price, & simple installation or removal makes it accessible to almost anyone. Once it is installed, it aids in prolonging the life of the fuel pump, the fuel filter, the fuel pressure regulator, the fuel injectors and more. Which, in turn, will leave your wallet thanking you.

The Dirt and Sediment in Your Gas Tank Can Be Costly Down the Road
The Gas in Your Tank After Using Clean Fuel Screen Filter Over Time

Top Parts Purchased for Driveability Problems

Fuel pump problems may be solved with preventative maintenance

The fuel pump is an integral element of any car or truck. Given the responsibility of literally pumping a vehicle’s fuel from its tank to the engine, a malfunctioning fuel pump will always lead to total disaster. Therefore, drivers need to be aware of the common symptoms of a malfunctioning fuel pump so as to address the problem before it leads to a car or truck that won’t start.


Fuel injection is a system for admitting fuel into an internal combustion engine. It has become the primary fuel delivery system used in automotive engines, having replaced carburetors during the 1980s and 1990s. A variety of injection systems have existed since the earliest usage of the internal combustion engine.

O2 Sensor Catalytic Converter

The O2 sensor is mounted in the exhaust manifold to monitor how much unburned oxygen is in the exhaust as the exhaust exits the engine. Monitoring oxygen levels in the exhaust is a way of gauging the fuel mixture. It tells the computer if the fuel mixture is burning rich (less oxygen) or lean (more oxygen).




It’s easy to start using the Clean Fuel Screen Filter. Simply place the filter into your gas inlet with one of the open sots facing the 6 o’clock position. Push the filter into the gas inlet until it snaps. Then replace your fuel cap. From there, you can pump gas as normal. The clean fuel screen filter will start to filter the dirt, sediment, and other debris so it won’t enter your gas tank and cause major problems down the road.


The Clean Fuel Screen Filter has been engineered to meet all of the evap and auto-shut-off valve specifications. Once the Clean Fuel Screen Filter is in place, the fine micro-filtration provided leads to the greatest secondary fuel system protection on the market.


The Clean Fuel Screen Filter is designed for single use.  When your clean fuel screen gets dirty, simply remove the filter.  Use pliers to avoid getting gas on your hands.  Then replace the filter and you are ready to start pumping clean gas into your gas tank.

The Science Behind the Clean Fuel Screen Filter

Small debris can mix in with the fuel during production, transportation, and during introduction to the vehicles fuel tank. Countries like the US currently have regulated fuel filters throughout the process including at the fuel pump. However, none of these filters are effective enough to prevent particulates from entering the fuel system. The evidence is seen in the fuel system failures resulting from the contaminants.

trio-easy no mechanic needed


Frequently Asked Questions

My car already has two fuel filters. Why do I need another one?
The two exiting fuel filters found in most vehicles exist because the car manufacturers know that the gas you put in your vehicle is dirty. Their idea is to clean it up after the fuel is in the tank. The Clean Fuel Screen Filter cleans the gas BEFORE it enters the tank, which drastically reduces future fuel delivery problems.
How does the Clean Fuel Screen Filter help my driveability?

Clean fuel increases the driveability of the car.  The Clean Fuel Screen Filter stops particulates, dirt, etc., from entering the tank.
The Clean Fuel Screen Filter protects the fuel pump, fuel injectors and the fuel pressure and allows the fuel pump to retain the correct fuel pressure designed by the manufacturer.
The driveability of the vehicle depends on the designed fuel pressure. When the fuel pressure drops, the vehicle’s performance decreases.

Will this filter save gas?
The cleaner the gas, the better the burn. The better the burn, the less fuel it takes to get the same results. The fuel injector breaks the raw gas to almost a vapor. A better breakdown causes a more powerful explosion in the cylinder.
How long does the Clean Fuel Screen Filter last?
It really depends on where you purchase the fuel and how dirty the fuel is. Typically, your clean fuel screen filter should last from 6 months up to one year before it needs replacing.
How does dirt get into my gas tank?
Dirt and particulates can enter your fuel tank as you are re-fueling your vehicle. The dirt and sediment already exists in the gas station tanks where you pump fuel.
Is there an extra cost to install the Clean Fuel Screen Filter?
No. Simply remove your fuel cap and insert the Clean Fuel Screen Filter into your car’s fuel inlet.
How do I remove the Clean Fuel Screen Filter?
It’s easy to remove the Clean Fuel Screen Filter. You can follow the easy to understand directions on the box to remove and replace the filter.

Prolong the Life of Your Car's Fuel Delivery System Now!

Stop Dirt and Sediment BEFORE It Enters Your Gas Tank!
We accept all major credit cards

Copyright 2022 | Clean Fuel Screen Company LLC | All Rights Reserved